King Innovation Waterproof Medium Wire Connector (12 ct.) | LV9500-12PK

• Type: Snap-Locking Waterproof Connector
• Temperature Range: -40 - 400°F
• Wire Range: #16 - #20
• Max Voltage: 300V, 10 Amps

Able to be used outdoor for electrical use, this wire connector sets at a max voltage of 30V or 10 AMPS. This connector is great for any irrigation systems or landscape light application.

• Silicone filled connector
• For use in irrigation and landscape lighting applications
• For low voltage applications (30V Max, 10 Amps)

Measurements:

• A - 2.263"
• B - 1.516"
• C - 1.042"

• Max. Voltage: 30V, 10AMPS
• Connector Size: 2.5" x 1.5"
• Wire Type: Copper/Copper
• Wire Range: Min #18/Max #10
• Temperature Rating: 90°C (194°F)
• Silicone Sealant Temperature: -40°F to 400°F

IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.

1. Strip wires 1" and group bare wire ends together. Do not pre-twist solid wire. You must pre-twist stranded wire. If using both wire types, you must wrap stranded wire around untwisted solid wires.
2. Insert wires through flexible sealing fingers and bend bare wire ends together into one "V-Channel." When connecting heavy solid wires, use bending sleeve/depth gauge on outer sleeve of connector. For larger connections (e.g. two #12 wires, or equivalent, or more), bend wires into the V-Channel with round hole at bottom; pull folded group of wires downward into this hole at bottom of "V."
3. Separate connector, removing plastic "link" or "leg" from inner sleeve. Push inner sleeve into pre-filled outer sleeve until double-locked. Ensure that bending sleeve does not come down over either latch. Pre-filled silicone fully waterproofs the connection. Do not reuse.