Blazing Twist Locking Waterproof Small Wire Connectors (200 ct.) | TLC-10-200

1. Important! Shut off the power before installing or removing the connector.
2. Strip wires 1/2 in. and align frayed strands and conductors.
3. Hold stripped wire ends evenly together. Lead stranded wire(s) beyond solid wire ends by approximately 1/16 in.
4. Firmly hold wire combination together and insert it through the center of the cap on the end of the connector.
5. Continue to push and twist clockwise until secure (1 to 2 wire wraps should be visible).
6. Wipe any excess silicone in and around the wires.

One (1) year from the date of purchase

• Wire Type: Copper/Copper
• Wire Range: #20 - #14 AWG (stranded), #18 AWG (soldered)
• Temperature Rating: 194°F
• Silicone Sealant Temperature: -40° to 400°F